PropReady

Technical track

11 min read · Reviewed 2026-11-16

Position sizing and risk per trade

You cannot control whether this trade works. You can control what it costs if it does not. That is the whole of position sizing, and it is the decision that most often separates a trader who is still in the account after a bad month from one who is not.

The part you actually decide

Entry, exit and target are all uncertain. Size is chosen before the trade and does not change while it is open. It is the only lever that converts an unpredictable strategy into a survivable one, which is why it deserves a decision rule rather than a feeling.

Two trades with the same setup and the same stop can carry wildly different risk. The difference is contracts. So the question is never "how sure am I?" It is "how many contracts does my stop distance allow?"

What a point is worth on the micro contracts

Risk starts with knowing what a tick costs. The micro equity index contracts are one tenth the size of their E-mini counterparts and their tick values are published by the exchange.10

Micro equity index futures. Tick values from CME Group contract specifications.10
ContractMultiplierTickPer tickPer index point
MES Micro E-mini S&P 500$5 x index0.25 pt$1.25$5.00
MNQ Micro E-mini Nasdaq-100$2 x index0.25 pt$0.50$2.00
MYM Micro E-mini Dow$0.50 x index1.00 pt$0.50$0.50
M2K Micro E-mini Russell 2000$5 x index0.10 pt$0.50$5.00

The practical version: on MNQ, one index point is $2.00, so a 60 point stop costs $120 per contract. On MES, one point is $5.00, so a 20 point stop costs $100 per contract. Same idea, twice the dollars per point.

Wrong way round

Do not pick contracts first and then look for a stop that fits your risk. Pick the stop the setup justifies, then let the arithmetic reduce the size. A stop moved closer to make the maths work is a stop placed where the market does not care about it.

Size from the stop, never from confidence

The calculation has three inputs and nothing else in it.

contracts = (account value x risk per trade %) / (stop distance in points x dollars per point)

A worked example. You have a 50,000 account and have decided to risk 0.5% per trade, which is $250. The setup on MNQ puts your stop 60 points away, which is $120 per contract.

Two contracts put $240 at risk, which fits inside $250. Always round down. Rounding up "because the setup looks good" is how a sizing rule stops being a rule.

How much risk a normal streak can survive

This is the part that decides the percentage, and it is arithmetic rather than opinion. A strategy with a real edge still produces runs of losers. If your win rate is 45%, then each trade has a 55% chance of being a loss, and a run of losses is not evidence that anything is broken.

The chance that any given block of four trades is four losses is 0.55 to the fourth power, which is 9.2%. In a 100 trade sample there are 25 non overlapping blocks of four, and the chance that at least one of them is all losses is about 91%. The same calculation for longer runs:

Probability of seeing at least one such run in 100 trades, at a 45% win rate. Computed from independent trials, shown so you can repeat it.
Losing runChance of the run in any single blockChance of at least one in 100 trades
4 losses in a row9.2%about 91%
6 losses in a row2.8%about 36%
8 losses in a row0.8%about 10%

An eight loss run is a one in ten event over a hundred trades. It is not a tail risk to be dismissed. It is something your sizing has to already assume, because you will not know it is an eight loss run until you are six losses into it.

Now put that next to a real drawdown limit. An Apex 50K account carries a maximum drawdown of $2,000.8 Here is what different risk per trade does to that account when the eight loss run arrives.

What a losing run costs at various risk per trade, against a $2,000 maximum drawdown.8
Risk per trade4 losses6 losses8 lossesShare of the drawdown at 8 losses
$125 (0.25%)$500$750$1,00050%
$250 (0.5%)$1,000$1,500$2,000100%
$500 (1.0%)$2,000$3,000$4,000200%

Read the middle row again. At 0.5% per trade, an eight loss run takes the whole drawdown and the evaluation is over, without a single rule being broken and without you doing anything unusual. The risked percentage that most people describe as conservative is, on this arithmetic, an account ending decision.

A rule that survives the arithmetic

Size so that the worst run you should realistically expect costs no more than half your maximum drawdown. On a 50K evaluation with a $2,000 drawdown, that is $125 per trade, which with a 60 point MNQ stop is one contract. One contract is a smaller position than most new evaluation traders want to trade, and it is the position the maths supports.

Costs are part of the risk

Commission and fees are not a rounding error at high trade counts, and they are charged whether the trade works or not. FINRA's illustration of the mechanism uses an equity example: at $16 per trade across an average of 29 trades a day, an investor would need an annual profit of $111,360 just to cover commission expenses.4 Futures pricing is different, but the shape of the problem is identical.

Do the sum with your own figures. If your all in round turn cost is C per contract, you trade N contracts per trade, T times a day, for D days a year, your cost is C x N x T x D. At $2.50 all in, one contract, five round turns a day, 240 days a year, that is $3,000 a year in costs before you have made anything. Your profit target has to clear that first.

Your stop is not always your risk

Risk per trade is calculated on a fill you may not get. FINRA's disclosure statement notes that under certain market conditions you may find it difficult or impossible to liquidate a position quickly at a reasonable price, and that trading on margin or short selling can produce losses beyond your initial investment.4 The CFTC makes the same point about leveraged forex, where you may be liable for losses beyond your deposit.1

Two habits follow from that. Leave headroom in your sizing for a worse fill than planned, and know in advance which events you will not hold a position through.

A sizing routine to run before every entry

  1. Account value today, read from the account rather than remembered.
  2. Risk per trade as a fixed percentage you decided in advance, not a variable.
  3. Stop distance in points, taken from the chart and the setup.
  4. Dollars at risk per contract, from the tick value table above.
  5. Contracts, calculated and rounded down.
  6. Cap by the firm's maximum contracts rule, since micros count at ten to one against minis on some accounts.6
  7. Write it down before the order, so the record shows the size was chosen rather than felt.

If the calculated size is zero because the stop is too wide for your risk budget, the answer is no trade, not a tighter stop.

Sources

The number next to each claim above is a stable source id. The same number means the same source on every page of this site.

  1. 1Customer Advisory: Eight Things You Should Know Before Trading ForexCommodity Futures Trading Commission
  2. 4Rule 2361: Day-Trading Risk Disclosure StatementFINRA
  3. 6Trading Combine ParametersTopstep
  4. 8Intraday Trailing Drawdown Performance Accounts (PA)Apex Trader Funding
  5. 10Micro E-mini Equity Index Futures: Frequently Asked QuestionsCME Group